COMPUTERS N LAPTOPS

Hey, check out these ebay auctions:
[eba kw="Vintage computing" num="10" ebcat="all"]
Cool, arent they?

Hey, check out these ebay auctions:
[eba kw="Vintage computing" num="10" ebcat="all"]
Cool, arent they?

The term "expansion bus "is a frequent term in vintage computer terminology which requires elaboration. Much of the legacy of vintage bus systems are in our current computer systems today.

To begin with the "expansion bus" is a data highway for computer data information to travel on: the bandwidth is in essence the number of lanes. The bigger the bandwidth the more data can be sent. As examples, an 8 megabyte bandwidth means that data can be sent in 8 bits chunks. Our current systems use between 32 bit and now 64 bit bandwidth.

An expansion bus is where cards connect to the computer; Cards have an expansion edge, which fits snugly into the bus much like an electrical plug fits into a wall socket.

When cards are plugged into the bus, they communicate with the system, sometimes through the BIOS and others not. (The BIOS is the basic input /output system that tells the computer how to move data from the different components.) The 8, 16 or 32 bit bandwidth is an important consideration due to communication time between the cards. For example you have a 16 bit vintage 286 PC and it is sending out data at 16 bits a: your video card is also 8 bits. If you have an older 8 bit bus, such as in early IBM PCs and clones, the bus will become a bottleneck in the system; it is like having a 4 lane highway connected to another 4 lane highway by way of a 1 lane road. At most times regardless of the faster 4 lane highway traffic will be slow - limited by the single lane connection road.

There were basically 3 types of expansion bus available in vintage computers: ISA, MCA, EISA systems.

Each early development in major ways paved the way for the later systems which indeed we take for granted today. This was both in terms of hardware and basic concepts in our computer systems and technology as well as computer marketing that we take for granted today as simple basic facts of life without any consideration due.

Basically the newer buses offered increased performance over the older technology buses.

The basic explanations of the buses are as follows:

The 3 bus standards to note were Industry Standard Architecture (ISA) .Micro Channel Channel Architecture (MSA) and Extended Industry Standard (EISA) bus systems.

Industry Standard Architecture (ISA). This was the original AT bus also called an ISA bus. It was the original 8 bit IBM PC bus which was bumped up to 16 bits at some point in its later development. Fine for a 16 bit 286 or very early 386 computers

Micro Channel Architecture (MSA). This was an early 32 bit bus system which was not received well but set the stage for an industry consortium of the major non IBM computer manufacturers ( at the time referred to as "The Group of Nine) to develop the EISA standard bus.

Extended Industry Standard Architecture (EISA). The EISA bus standard was a standard of its own right which was 32 bit, included bus mastering and importantly remained compatible with previous older expansion cards. 32 bit systems were first to incorporate in later 386 systems. The 486 line solidified and standardized the 32 bit systems in the established software of the day.

Backward compatibility at the time was a novel new concept which has remained an important consideration in the computer industry.

EISA slots would accommodate both the ISA and EISA expansion slots to allow hardware upgrades, However the EISA expansion boards would be of little advantage and would seldom work in the older ISA expansion slots.

On the other hand the Micro Channel setup was not backward compatible. On the one hand the Micro Channel developers were free to initiate new radical changes in computer development and hardware which would have allowed for major new useful features in computer software. However owners of previous systems would have been left with then obsolete vintage useless hardware which would have been of no use and certainly little financial value.

Hence there was a lot of resistance to the Micro Channel bus setup.

It died a lingering death with its legacy living on in the aspirations of features offered in future developments and standards.

Thus the die was set for future hardware standards and software function as well as standard computer marketing concepts that we take for granted like mother's milk today.

Vintage Computer Add-in cards come in three basic flavors: 8-bit, 16-bit and 32-bit. These terms refer to the number of data bits the card sends out at one time. Ideally a 16-bit video card sends an image to the monitor in half the time it would take for an 8-bit version. It is important to know what kind of card your vintage computer accepts. The older PCs and XTs usually have an 8-bit or PC bus, which accepts the older PC bus, which accepts only the 8-bit cards. Vintage computers which are of more recent vintage use a PCI bus combined with ISA (Industry Standard Architecture).

The ISA bus was basically the original AT vintage computer bus. This expansion bus originated with the IBM PC at an 8-bit bandwidth. IBM improved on the design with the PC/AT raising the bandwidth to the 16-bit standard.

In addition to the ISA bus, there is typically an auxiliary bus such as the VL-bus or the even more recent and now accepted standard the PCI bus both were designed for video cards so that they could operate at faster speeds. The PCI bus as we know went on to become the industry standard all purpose bus. Another bus called EISA was going to become the industry standard but instead went on to have a life almost exclusively in the server realm.

What was the basis of the development of the PCI bus? When the Pentium chip was released Intel saw the need for a more general purpose local bus that would eventually supplant the ISA/EISA and VL-bus designs completely. So Intel invented the Personal Computer Interconnect bus now more commonly without the comprehension of the historical background - the PCI bus.

An important point to remember is that the EISA is backward compatible with 8-bit cards (8 bit cards fit into EISAand EISA slots) but MCA will not work with either of the other two standards. (Backward compatible means that the device works with all previous hardware technology, but will not necessarily work with newer configuration standards). In other words cards for an EISA bus computer the cards from an ISA bus computer will work in the EISA vintage computer. However if you try to use these cards in a newer IBM you are out of luck if you want to use your older cards.

Many video cards manufactured later were available in AT-ISA, PCI and VL bus. What would be considered newer more recent vintage computers were equipped with either a couple of VL slots and / or some PCI slots? If the vintage computer supports PCI bus this is a wise choice for performance and should be utilized if at all possible.

Vintage computer add-in cards can also be described in terms of length -